Using a dehumidifier in your home is not a new thing. People have installed portable and permanent dehumidifiers for decades. With a dehumidifier, you reduce the risk of molds, moisture, and condensation build-up.
This article examines all the benefits of dehumidifiers, shows you what to look for when deciding which model to buy, and shows you the best humidifiers with a built-in pump. Read on to find your next dehumidifier with a pump and see for yourself how great your home can feel.
Benefits of Using a Dehumidifier with Built-In Pump
You have many choices when it comes to dehumidifiers—portable, whole-home, in-duct, and more. You also have a choice in how the collected water is removed. Some choose a gravity drain system, while others prefer the benefits of dehumidifiers with built-in pumps. Why?
- Pump models can move water uphill, ideal for basement installs.
- Low maintenance. With a pump, you don’t have to continuously empty water trays.
- Easy positioning. You can place the pump virtually anywhere since the pump will do all the work.
- Drain locations. With a pump model, you don’t have to worry about where the drain is located (or if you even have one).
- Automatic restart. Many models will feature an automatic rest switch in the event of a power outage.
- Greater reach. Unlike gravity drain systems or portable units, dehumidifiers with a pump can move the water as much as 50 feet or more.
Dehumidifiers with Pumps Compared
Buyer’s Guide: Choosing Dehumidifiers with Pumps
There are a few different types of dehumidifiers, from compressor models that work like a reverse air conditioner system to those that use desiccant material to absorb the water. We have more details on the various types below the reviews.
However, it is important to understand the different models and their abilities or shortcomings before you buy.
Dehumidifiers work off of a humidistat. Like a thermostat, this device measures the humidity levels and will turn on or off based on your settings. The ambient temperature, region-specific locations, and other data are all needed to maintain the proper humidity level in your home.
When buying a dehumidifier, make sure the operational temperature range falls within your location’s average temperature cycles.
Capacity & Coverage Area
Like air conditioners and humidifiers, dehumidifiers work best when they are sized appropriately for the rooms or homes they work in. The capacity of the machine will determine how much moisture it can remove from the air (measured in pints per day, or PPD).
This number relies on factors like temperature, average annual humidity levels, and the size of the space. Buying a machine too large will hurt your energy bill while buying one too small will make the unit work harder and burn out motors and pumps faster.
Not all dehumidifiers are built the same. Some have noise-dampening; others do not. Usually, this is a budget or price factor. However, depending on where you plan to use the machine, it can make all the difference.
For example, base installs can handle a louder machine, which may save you a little bit of money. Installing a dehumidifier in the living room, though, will require a quieter operating machine.
Filter Indicator Light
Filters need to be cleaned or replaced (depending on the type), and trying to remember the life cycle can be difficult. If filters last 3 to 6 months, you may end up forgetting all about it until it is too late. A filter indicator light will help remind you when the filter is dirty or time for the scheduled replacement.
The drain height refers to how high and far away the drain can be from the machine. With models that have a built-in pump, you don’t need to worry so much about this. However, 10 to 15 feet drain height is about average.
With this distance, you can pump water up and out based on the pump’s abilities. If the drain area is level with the pump, it may be able to push slightly further.
Low Temperature Settings
Winter doesn’t stop the need for dehumidifiers. However, low temperatures can cause problems with the functionality of the machines. Buying a unit with low temp settings will help maintain the device’s functionality, even when temperatures drop into or below the 30s (Fahrenheit).
Frost sensors allow the machine to run in low temperatures. When the coils freeze over or develop frost, a frost sensor will tell the unit to enter defrost mode. Many will continue to operate while defrosting, though at a lower capacity. Some models will need to defrost entirely before resuming work.
Digital controls allow you the chance to have more say over how the machine operates. With LCD or LED screens and digital or touch-sensitive control options, the cost may be slightly higher, but you will know the exact settings without guessing. With dial or analog controls, you may not be exactly on the numbers you want or need.
Price & Warranty
The price is going to be the most significant decision factor out there. You want to stay within budget, but you also need to make sure the core components meet your needs. The additional features are a bonus and will help with operation and maintenance, but many aren’t needed.
Make sure when making your purchase, you get what you need in terms of size and capacity, but leave room for added features to make the investment more enjoyable.
Don’t forget to check the warranty before you buy, too. Warranty coverage will vary from brand to brand and even model to model. Time of coverage is important, but you should also know what is covered and what is not.
Many warranties require you to maintain receipts, packaging, register within a specific time frame, or even pay for shipping during a claim. Understanding these factors will help determine if the warranty, and thus the machine, are worth it. If not, you should look for a different dehumidifier.
7 Best Dehumidifiers with Pumps Reviewed
Our Top Pick
|Moisture Removal||50 PPD|
|Coverage||4500 square feet|
|Water Tank Capacity||1.5 gallon|
|Air CFM Range||110 – 140 CFM|
|Drainage System||Tank or pump drain|
The TOSOT dehumidifier is designed for large spaces and high humidity. Using this model will reduce your humidity, making the home more comfortable, and having to run your air conditioner less often. TOSOT easily has the best dehumidifier with built-in pump.
When the humidity level is low, your air conditioner can more efficiently change the air temperature, meaning it runs less often. With this mode, made for spaces between 3000 and 4500 square feet, you can lower the moisture in your entire home with ease.
The best 50 pint dehumidifier features an auto-restart that maintains settings and restarts the machine in the event of a power failure. You also get the LED readout with digital controls, so you always know what your settings are.
With a washable filter and filter indicator light, you will always know when it is time to wash or replace the filter (after 250 hours of operation, on average). You can also set the humidity level.
With this feature, you can program the unit to maintain a specific humidity level. Once the humidity level is reached, the unit will shut off. When humidity rises again, the unit will kick on once more. If you want to run the dehumidifier continuously, you can set the humidity level down until the display reads “NS” (Not Set), and the unit won’t ever shut off.
The drain system works in two parts. With the 1.5 gallon reservoir, you can manually empty the bucket. It offers a swivel handle and no-slosh sides to prevent spills. However, with the built-in pump, you don’t need to worry about this.
Once you connect the drain hose and activate the internal pump (through the display panel), you will no longer need to empty the collection tank manually. The pump doesn’t run constantly. Instead, a sensor in the tank will alert the pump when the bucket is near full. The pump will come on and empty the bucket and then shut off again.
- Auto on/off pump
- Three speed fan
- Humidity level setting
- Full digital controls
- Auto-restart function
- Bucket may not empty entirely with pump
- 1-year warranty
Best Crawl Space Dehumidifier With Pump
|Moisture Removal||90 PPD|
|Coverage||2600 square feet|
|Water Tank Capacity||N/A|
|Air CFM Range||210 CFM|
When you need to seriously remove moisture, you want the best crawl space dehumidifier with a pump. The AlorAir model is just that. This unit moves a lot of air, eliminates a ton of moisture, and is rated for continuous use if needed.
This model features the built-in pump that can move water up to 12 feet. So if you need to go up from the crawl space or out a window, it has the power to do so. It will also drain continuously, so there isn’t a water tray to monitor or empty.
The drain pipe isn’t that long, only about 16 feet. However, you can add hoses as long as you make sure they are clamped in place or use a threaded hose adapter with Teflon tape to prevent leaks.
As far as controls go, there aren’t a lot here. You can set the humidity range and turn the machine on or off. It does, however, offer a remote control with sensors to allow remote operation and monitoring. Should anything go wrong with operation, you will get indicators on the remote panel.
With a 5-year warranty, you can rest assured that the dehumidifier will perform as expected, and should anything go wrong, you are covered. Customer service is a little challenging to get a hold of, but help is friendly and efficient once you do.
Make sure you have the proper ducting if this unit is a permanent crawlspace install. There are standard duct vent mounts on the intake and exhaust. If you are only using it as a temporary machine while you are doing work or remodeling, you can get away without using air ducting.
- 5-year warranty
- Remote panel and sensor operation
- 12-foot drain height
- Ideal for wet basements and crawlspaces
- Runs continuously
- Limited controls
Best Commercial Dehumidifier With Pump
|Moisture Removal||93 PPD|
|Coverage||6000 square feet|
|Water Tank Capacity||N/A|
|Air CFM Range||386 CFM|
|Drainage System||Continuous pump|
The best commercial dehumidifier with a pump is easily the Colzer model. This industrial unit has power to spare and will remove a lot of moisture. The 190 PPD (at saturation) removal rating is a bit high, but it isn’t wrong.
Using current 2020 standards (65 degrees, 60% humidity), the Colzer removes 93 PPD. For construction sites, worksites, swimming pools, and other large spaces, you can turn this machine on and let it work without a lot of close monitoring.
In fact, many contractors choose this model because they can set it up at the end of the workday and let it run overnight without having to leave anyone behind to watch it.
One major downside is the weight. This unit weighs just about 100 pounds. Getting them to and from the job site can be a challenge. However, the large, industrial-strength wheels do help. If you have to traverse stairs, though, prepare to lift.
The dehumidifier uses a constant pump drain system. As long as the unit is pulling moisture from the surrounding air, the pump moves it down the drain. The powerful pump has a 15-foot drain height capability and is ideal for low areas or situations when drains are far away.
The warranty covers the entire unit for 2 years. This includes the controls, display, motor, fans, and pump. There is an added 3 years (5 years total) that covers the case housing. The case is highly durable, though, and even tips and falls won’t cause damage or cracks.
- 15-foot drain height
- 2/5 year warranty
- Capable of running unattended overnight
- Ideal for work sites
- No humidistat
- Weighs 100 pounds
4. Aprilaire 1850 Pro
Best 95 Pint Dehumidifier With Pump
|Moisture Removal||95 PPD|
|Coverage||5200 square feet|
|Water Tank Capacity||N/A|
|Air CFM Range||250 CFM|
|Drainage System||Auto pump|
If you want even more power and a dehumidifier that can be used almost anywhere, the Aprilaire 1850 Pro is a model worth looking at closer. This is a whole-home style dehumidifier that can mount in the basement or crawlspace.
It also requires less maintenance than a lot of other models. The washable filter, for instance, is a 5443 metal mesh screen filter that only needs to be cleaned out about every 12 months. It also features a control panel that can be mounted on the front or top of the machine.
With various installation positions and options, you can put it almost anywhere. The downside is that because of the configuration possibilities, it doesn’t include the required ducting. You will need to buy your air ducts separately.
The continuous drain pump makes life easier too. It removes the need to empty water trays and can move water pretty far. With a 15-foot drain height, going up through a crawlspace out of a basement isn’t a problem.
The unit does get loud and can be a difficult install depending on the location. The unit features leveling feet, but they are screw type and not pressure leveled, so you will have to screw each one while it is in place to get a perfect level.
- 5-year warranty
- Simple set up and installation
- Lifetime, washable screen filter
- Various capacity models available
- Doesn’t include required ducting
- Operation is noisy
Best Portable Dehumidifier With Pump
|Moisture Removal||50 PPD|
|Coverage||2500 square feet|
|Water Tank Capacity||2.0 gallons|
|Air CFM Range||152 CFM|
|Drainage System||Reservoir, continuous pump|
Frigidaire is a name that knows a thing or two about humidity and moisture control. Their host of appliances and air conditioners should leave little doubt about their capability as a manufacturer of dehumidifiers.
This unit removes a lot of moisture. When set to run at optimal settings, it will remove 50 PPD from your air every day. With continuous draining through the internal pump, you don’t even have to worry about emptying the water tank.
However, if you choose to do so, the tank will hold 2 gallons of condensate water, which means when it runs for 24 hours, you will only need to empty it about twice.
If you forget or are not home, the automatic shut-off will kick in when the tank is full so that the unit won’t overflow the tank. Still, it is best to connect the drain hose and let the pump handle the draining for you.
With a drain height of 16 feet, you don’t need to worry about the unit’s position or location. You can connect a standard garden hose to the drain port and let the machine do the rest. Uphill, out a window, or even up through a crawl space, the dehumidifier will run, drain and keep your air much drier, no matter where you put it.
- 1/4 year warranty
- Spill-proof reservoir
- Multi-speed selection with auto shut off
- 24-hour continuous operation
- Filters are not readily available
- Unit operates quite loud
Best Dehumidifier With Pump For Basement
|Moisture Removal||70 PPD|
|Coverage||5000 square feet|
|Water Tank Capacity||1.8 Gallon|
|Air CFM Range||148 CFM|
|Drainage System||Reservoir, Continuous pump|
If you have a wet basement or use your basement as a laundry room, you need extra humidity control. The Shinco dehumidifier is easily the best portable dehumidifier with a pump for your basement.
This model will move a lot of air and removes up to 70 PPD of moisture from that air. In a basement, this can mean the difference between a comfortable space and mold growth. The unit does push out a lot of hot air and can raise the temperature in a smaller basement.
It is suggested that you use this model in an open basement with at least 2800 square feet. All in all, the Shinco dehumidifier will alter the humidity levels in spaces up to 5000 square feet. The heavy-duty unit is compact but powerful.
With all digital controls and auto restart in case of power failure, you never have to worry about the humidity in your home. You can set the preferred levels and let it run. With a 1.8 gallon tank, you can empty the reservoir when it gets full. Or, for best practice, connect a garden hose.
The internal pump will remove the collected moisture as needed to keep the unit moving along. It also features an internal drying option. If you put it away for the season, running this first will remove all moisture inside the unit and prevent mold growth.
- Auto reset feature
- Dries itself internally to prevent mold
- Continuous drain pump runs quiet
- All digital controls
- Ideal for basements
- 1-year warranty
- May be too powerful for smaller spaces
Smallest Dehumidifier With Pump
|Moisture Removal||50 PPD|
|Coverage||4500 square feet|
|Water Tank Capacity||2.25 gallon|
|Air CFM Range||138 CFM|
|Drainage System||Reservoir, pump|
Ivation gives you the most compact yet powerful dehumidifier on the market. This is the smallest dehumidifier with a pump and can move a lot of air, considering its size. With a 50 PPD moisture removal at 138 CFM, it is a wonder how this machine is so energy efficient.
It offers you an LCD screen to know where your settings are at and an internal humidistat to maintain operation. This model also features dual fan speeds and timer control. With the timer set, you can walk away knowing the unit till turn on or off when needed.
It also has two automatic functions. First, the automatic restart will restore settings and continue operation after a power outage. This will help if something happens while you are away and can still come home to a comfortable home.
Second, it offers an auto-defrost feature. If the coils get frosted or the ambient temperature is low and causes frost, the unit will stop operation and defrost the ice away. After the frost is gone, this model will resume dehumidifying the air.
The one downside is the warranty process. It is challenging to register your product. There isn’t a warranty card, and as of now, Ivation doesn’t allow online registration. Should you need assistance during your 1-year warranty, you will need to maintain and show proof of purchase, with the date to get the claim process started.
- See current temp and humidity on LCD
- Auto-restart feature
- Defrosts on its own
- Caster wheels for better portability
- 1-year warranty
- Can get hot to the touch
3 Types of Dehumidifiers Explained
When it comes to how dehumidifiers do their thing, there are three basic types. Below we cover how these types work and explain why you may want to choose (or avoid) a certain type.
Compressor models are the most common. They use electricity to power a compressor that passes refrigerant through coils. This works much like your refrigerator or air conditioner. The colder, humid air is drawn in by a fan and passed over the coils.
The moisture condensates on the coils and drips into the collection tray, where it is then pumped out and drained away. The air is reheated and pushed back into the room, giving you warmer, lower humidity air in the space.
These types are much louder than the other types, and many will employ muffling options such as motor mounts or dampening shields to block some of the noise, but not always.
Desiccant models use a fan to pull air in and pass it over or through a silica gel material. Think about those little “do not eat” packets you find in items you buy. This natural moisture absorbent is used in the form of a filter material.
Electric pads are used to dry the desiccant so it can absorb more moisture. Eventually, the desiccant filters will need to be replaced but are relatively inexpensive. Because the only motor in these units is on the fan, they are extremely quiet.
However, they also lack the ability to control how much moisture is collected. Using these in larger spaces can result in too much moisture being removed from the air, leaving you too dry. They also use a lot more electricity, which can raise your monthly energy bill significantly.
Thermo-electric models use what is known as a Peltier pump. These solid-state pumps are quiet, making them ideal in dehumidifiers. However, because the heat transfer isn’t as controlled, low temps and freezing are typical.
Use of these types of dehumidifiers requires more defrosting cycles to maintain operation. The pumps move heat from one end to the other, which causes the condensation as air passes through. While they do work in smaller units, large capacity dehumidifiers tend to be more problematic.
Dehumidifier Sizing Guide: How to Choose the Right Size
To know what size dehumidifier to shop for, you first need to understand how they are sized. Sizing refers to the amount of airflow and moisture removed from that air in a 24-hour period. This removal amount is measured in pints per day (PPD).
For example, if you see a rating of 40 PPD, you know the machine will remove 40 pints of moisture for every 24 hours it runs. The rating determination was established in 2012 with different numbers. The new ratings are set to the PPD in a room at 65 degrees (F) with a relative humidity level of 60%.
Because capacity is measured in airflow and moisture, it is a simple switch to square feet of coverage. Therefore, you do not need to know how much moisture is in your air; you just need to know the square foot measurement of the room or space you want to use the machine in.
The following ranges will depend on humidity levels in your area. Higher humidity requires more PPD.
|Square Foot||PPD Capacity|
|300 sq ft||20 – 25 PPD|
|500 sq ft||30 – 40 PPD|
|800 sq ft||40 – 50 PPD|
|1200+ sq ft||50 – 60 PPD|
Average Dehumidifier Running Costs
To determine how much your dehumidifier will cost you, you need to know a few things first. The main thing you need to know is how much your electric company charges you per kilowatt-hour (kWh).
You also need to know how much wattage the dehumidifier draws. If the rating is shown in watts, you are good to go. If it shows only volts and amps, then you have a bit of math to do.
Kilowatt-hours are found by multiplying volts and amps then dividing by 1000. For example, if your machine is 6 volts and 5 amps, it draws 30 watts per hour. Divide this by 1000, or 0.03kwH per hour of use.
You can also get even more specific by knowing how many hours the unit will run per day. Assuming it is 5 hours, then you multiply your kWh by 5. IN the above example, this would then be 0.15 kWh per day.
If your electric company charges you 3 cents per hour, then the unit in the example would cost you (0.15 x 0.03) x 24, or about 11 cents per day. Over an entire year, you are looking at an average cost of $39 to run the dehumidifier.
Larger units will cost more, of course. The average costs for small, portable units (20 PPD) running 4 hours per day is about $28 per year. Large units (70 PPD+) can average about $350 per year.
People Also Ask (FAQ)
Do dehumidifiers with pumps consume more energy than no-pump models?
Yes, units with built-in pumps require more energy. On top of the energy to dehumidify the air, they also require energy to run the pump to drain the collected moisture.
Should a dehumidifier run all the time?
No. Running a dehumidifier all the time will drastically raise your energy bill and will dry your air out too much. If you don’t want to constantly turn the machine on or off, make sure you buy a dehumidifier with a humidistat control that only comes on when needed.
How do I install a dehumidifier with drain pump?
Installation isn’t much different than any other type of dehumidifier. Once you have the unit in place and set up, you only need to connect the drain hose to the machine and run it to a drain. You can also run the hose outside, into a gutter or a garden.
The only thing you must keep in mind is the distance the pump can move water. If you make the hose too long or the drain is too far way, you can end up with standing water in the hose, leading to mold or a clogged pump.
Where is the best location to put these appliances in the home or workplace?
The ideal place to put these machines is in areas where you have the highest humidity levels. This is generally the basement, crawl spaces, or wet areas like bathrooms or laundry rooms. You also want to make sure there is a drain nearby for the pump to empty the collected water into.
Where is a good place to buy these units?
You can purchase dehumidifiers with built-in pumps at most major outlets. This includes big box stores like Home Depot and Lowe’s. Walmart is also a supplier with a good selection. One of the best places, though, is through Amazon.
You will have a much higher variety of brands and models and can easily take advantage of sales, warranty extensions, or special deals not found anywhere else.
Dehumidifiers help us out by keeping our homes’ relative humidity levels regulated to 30 – 60%. At this range, your skin doesn’t dry out, mold won’t grow, and the entire home is more comfortable.
Choosing the best dehumidifier with built-in pump can be a challenge with so many options available. If you are still undecided, check out our top pick again. The TOSOT dehumidifier has a 50 PPD capacity and covers areas up to 4,500 square feet. It also has a quiet operation and continuous drain capabilities to fit any home or basement space.
Last Updated on July 16, 2021
- What Does Eco Mean On An Air Conditioner? (Explained) - May 25, 2022
- How Long Does It Take For Freon In An AC To Settle? - May 25, 2022
- AC Running Constantly & Won’t Turn Off At Set Temp (Causes) - May 24, 2022